View source for Headset Phonak FreeCom 7100

==Controls==
* Turn on: rotate the battery cover to the "I" position. A beep indicates everything is OK. Ambient sound awareness is active
* Volume control:
** Using the "+" and "-" buttons:
** Volume can be adjusted 2 levels up and 7 levels down from the default position
** 2 beeps signal indicates when the maximum or minimum level is reached
* Ambient sound:
** Turn on and off: press shortly the big round (mode change) button
** Volume:
*** Press the big round (mode change) button for more than 2 seconds (three beeps indicate entering the mode)
*** Adjust the volume using the "+" and "-" buttons
*** Volume can be adjusted 4 levels up and 7 levels down from the default position
*** 3 beeps signal indicates when the maximum or minimum level is reached
*** After 3 seconds of inactivity (no button press) the headset returns to normal mode (three beeps indicate exiting the mode)

[[File:PhonakFreeCom7100-Controls.png||Phonak FreeCom 7100]]

== Indications==
* Beeps every 30 seconds: battery is running low. Beep frequency increases when battery becomes weaker

==Ear Molds==
* Red = right ear
* Blue = left ear
* Can be washed with soap and water (removed from the earJack)

== Microphone ==
* Keep about 1cm from mouth
* White dot (under the windscreen) shows which side the microphone is on
* The windscreen is attached using Velcro